Garage Epoxy Floor Kit – 100% Solids - 2 Part Industrial-Grade Coating w/UltraGlaze Topcoat | DIY Slip & Hot Tire Resistant | 300 Sq Ft - Blue - 17 pc kit

The media could not be loaded. After binge-watching a ton of epoxy floor makeover videos, I decided it was time to give our garage a serious glow-up—and Armorpoxy seemed like the perfect choice for the job. We’re in the middle of a full garage remodel, and this floor was the foundation (literally) of the entire vibe.Between work and life, the project took a couple of weeks to complete, but the results were worth every bit of effort. I used two kits for my standard two-car garage, and that ended up being the sweet spot to get full coverage and the finish I wanted.The product itself was solid—good consistency, easy to apply if you follow the steps, and the final look? Sleek, clean, and seriously elevated. The space already feels brand new, and I can’t stop admiring the shine and texture.I’ll be back in a year to post a follow-up and see how it’s held up over time, but for now—this kit definitely delivered. If you’re on the fence about it, go for it. Great product, great results. Brand new floor, brand new vibes.

I was initially a bit scared to tackle my garage floor with ArmorPoxy, but I’m so glad I took the plunge! The results are absolutely amazing, the transformation exceeded my expectations. The process was straightforward, and once I saw how great my garage looked, I felt confident enough to do my shed floor as well. Highly recommend ArmorPoxy for anyone looking to upgrade their space!

Great product. The video provides a step-by-step; be sure to follow the instructions! We bought extra flakes, and the floor turned out fantastic. We had a professional company do our attached garage and figured we would save ourselves thousands; we were worried, but ours turned out just as lovely. There was a strong odor at first, but it is easing. I highly recommend this product.

Relatively easy DIY installation. Looks great. Can’t speak to long term durability since floor was just installed. Only nit is that my garage is 545 s.f. and the 600 foot kit barely made it. Would be nice if Armorpoxy had 100 foot add ons if your close rather than upgrading in 300 foot increments.

1 year update - This survived perfect over winter in a heated garage. The garage is set to 45, so it is on the cold side. There was absolutely no cracking or flaking. This has held up and still looks like new. One thing to be careful on: avoid putting tires on relatively fresh epoxy or it might stain.----original----I debated epoxying the ~40 year old garage for a long time. I was originally going to go with RustOleum, but I am incredibly happy I found this product. It includes nearly everything to complete the job like a pro. I used 3x 600sqft kits in an ~1400sq ft garage. The concrete was very old and worn, so I used more material than needed to help hide spalling/etc.Prep is the most important part. Sweep, hose out, de-grease, acid etch. After the acid etch you will need to extremely thoroughly wash the surface off - if you can't hose the area out, you will want to use a wet/dry vacuum and loads of water. Watch the manufacturers videos to better understand how to apply this. I highly recommend the squeegee to spread the product quickly and then go back and back-roll with the roller. Timing wise, I applied this when it was over 90 outside. I applied roughly 1 gallons at time leaving a 'wet edge'. Realistically, I had plenty of time once the product was down to walk on the surface and apply flakes. A tip for the flakes: practice on a tarp and throw the flakes into the air. Also don't ever grab a full handful.Because we needed the storage, this was applied to one half the garage and then the other. If you need to do the same, don't apply flakes to the edge, don't clear coat the edge, sand the edge prior to the next coat if more than a few days since it was applied.There is more than enough clear coat for multiple coats. If desired, you can pick up more anti-slip additive to add to it (which I did). Once applied, the floor feels like sandpaper. That makes me feel much better about applying this to stairs as well.Overall I am thrilled with the result. The end result look amazing and will hopefully last a long long time. I will update if I run into any problems.

Overall, I had a great experience with using this product and the end result looks great. A few notables:- Surface prep is critical (and it takes time)! I used an additional acid wash (using my pool muriatic acid) to ensure the concrete was clean and ready to absorb.- I used 2 coats on my 300sqft space. The first was like a primer, and then I added the flakes for just the second coat.- I left my garage door open for initial drying and then we had a rain storm. That created some pitting in the 2nd coat (see close up picture). I think it will hold up just fine, but was unfortunate. My bad…- The kit does not come with a mixer attachment as shown. Not sure if it was forgotten or what.- The racing blue color is bright and bold which I really like!

This epoxy floor kit is easy to use with helpful instructions and videos. This product took about 3 days to install, 1 day for prep, 1 day for epoxy coating and 1 day for clear coat finish. This kit came with everything to do the job and still had a little left over. This project was much more cost effective than paying someone else to install.

I like it when it's new, but hard to clean to original quality, I'd say. Plenty for a 3 car garage! The tires like to turn spots yellow and not easy to remove it.